We Know What You're Thinking....
You're thinking, "wait a minute, that can't be right. There's no way you can get an sE Electronics mic that cheap!" right? Well, guess what - you can! The awesome sE Electronics X1 condenser mic hooks you up with one of sE's amazing large-diaphragm capsules, you know, a hand-made, 1" capsule that's got that super rich and clear sound you crave. Stick this in front of your mug and prepare to be totally blown away by how your vocals sound. The X1's also go a 10dB pad and a bass rolloff switch for extra flexibility, so you can stick it on drums, amps, and other instruments and get the same oh-so-smooth condenser sound. And check this out: the sE X1 also sports this awesome, super-tough black rubber paint finish, which is great, 'cause let's face it, you're going to use this baby so much, it's bound to take some shunts and bumps along the way. Order your Se Electronics X1 from GearNuts.com, and let the freaking out begin!
sE Electronics X1 Cardioid Condenser Microphone Features at a Glance:- Large-diaphragm condenser microphone with a 1" hand made capsule
- 10dB switchable pad
- Bass roll off switch
- Extremely durable black rubber paint finish
- Frequency Response: 20Hz-20KHz
- Sensitivity: -32 dBV/Pa (25.1mV/Pa)
- Polar Pattern: Cardioid
- Impedance: 200 ohms
- Equivalent Noise Level: 16dB(A weighted)
- Max SPL for 0.5% THD@1000Hz: 125dB
- Power requirement: Phantom power 48Vą4V
- Connector: 3-pin XLR
| sE Electronics X1 Specs: |
| Microphone Type |
Condenser |
| Mono/Stereo |
TBD |
| Polar Pattern |
Cardioid |
| Diaphragm Size |
1.26" (32mm) |
| Frequency Response |
20Hz-20kHz |
| Max SPL |
125dB SPL |
| Output Impedance |
200 ohms |
| Signal to Noise Ratio |
TBD |
| Self Noise |
16dB (A weighted) |
| Low Cut Filter |
500Hz, -4dB/octave |
| Pads |
-10dB |
| Color |
Black |
| Connector |
XLR |
| Weight |
1 lb. |
| Included Accessories |
Stand mount |
|
Close
