This Amp Head is Made for Modern Rock!
Plug into the Egnater Vengeance tube amplifier head if you want to craft the perfect modern rock tone. This two-channel, 120-watt beast is made to pump out high-gain metal tones that hit you in the face with clarity and precision. Some high-gain amplifiers sound indistinct and muddy when you really start wailing on 'em, but not the Vengeance. The premium tube signal path, and the deep tonal control provided by the Tight, Bright, and MID voicing switches, gives you access to aggressive tones that still articulate every single note you play. So whether you want to unleash sonic fury on your fans, or just want a very flexible and very roadworthy rock amp, the Egnater Vengeance tube guitar amplifier is ready to perform.
Egnater Vengeance Tube Guitar Amplifier Head Features at a Glance:- Two-channel tube amplifier with switchable 60W/120W operation
- Individual reverb on each channel, with "spillover" when switching channels for a natural sound
- Tight, Bright, and MID voicing switches give you much more tonal control than standard tone knobs alone
- Secondary master volume can be switched on/off for volume boosts
- Assignable FX loop can be applied to either or both channels
- XLR output for direct, speaker-emulated recording
- Six-button footswitch included
| Egnater Vengeance 120 Watt Tube Amp Head Specs: |
| Type |
Tube |
| Number of Channels |
2 |
| Power |
120W |
| Effects |
No Effects |
| Reverb |
Yes |
| EQ |
Bass/Middle/Treble, Each Channel |
| Amp Modeling |
No Amp Modeling |
| Number of Models |
No Amp Models |
| Number of Tubes |
10 |
| Preamp Tubes |
6 x 12AX7 |
| Power Tubes |
4 x 6L6 |
| Inputs |
1 x 1/4" |
| Outputs |
2 x 1/4" Speaker Out, 1 x XLR Record Line Out |
| Footswitch I/O |
Yes |
| Effects Loop |
Yes |
| Height |
10.25" |
| Width |
28.25" |
| Depth |
9.25" |
| Weight |
48 lbs. |
|
Close
