All-tube Madness for Your Bass Rig!

The Peavey VB-2 bass amp head offers amazing tonal options, with headroom to spare when you need it. Everybody knows that tube watts are much louder than solid-state watts, and the 225-watt VB-2 takes full advantage of it. The tube-driven preamplifier and power sections let you dial in everything from crystal clear and punchy to growling and edgy, and its active EQ features a multi-frequency mid adjustment, allowing you to be heard no matter what stage you're on - and sound killer in the process! If you want to harness genuine tube tone for your bass rig, the VB-2 is your head!

Peavey VB-2 Bass Amp Head at a Glance:

• Amazing tone control
  
• Tube power, incredible sounds
  
• Matches up with practically any cab

Tube power, killer sounds
The VB-2 is made around a tube power section that utilizes six EL34 tubes to deliver its 225 watts of power. By adjusting the Clean Gain and Overdrive Gain controls on the footswitchable Clean and Crunch channels, respectively, you can dial in tones ranging from the snarling grit of rock and metal to the weighty thump of old-school dub and reggae to clean, punchy hi-fi-all while delivering the necessary "cut" to maintain a tough bass presence in live performances.

Incredible tone control
Backing up the amplifier's tube growl is a 3-band EQ that combines the best attributes of passive and active tone controls. This section includes high and low controls, plus a mid control with a four-position midrange selector switch that lets you set the mid-frequency shift at 200, 400, 600 or 800Hz.

Matches up with practically any cab
Peavey's patented Resonance and Presence controls, which adjust the damping factor at the low and high ends, respectively, plus a three-way speaker impedance selector, enable players to match the VB-2 to virtually any bass speaker enclosure. A footswitchable mute/tuner circuit and front-panel effects loop offers up more flexibility.

Peavey VB-2 Bass Amp Head Features:

• 225 watts into 2, 4 and 8-ohm loads
  
• Six EL34 power tubes
  
• Two 12AX7 and one 12AT7 preamplifier tube
  
• Ceramic tube sockets
  
• Classic-style, EI core, power and out transformers
  
• Power and standby switches
  
• Two ins for high and low out basses
  
• Mute switch for silent tuning
  
• Buffered, tuner send jack
  
• Pre-/post-EQ XLR direct output w/ level control and ground lift
  
• Foot-switchable Clean and Crunch channels
  
• Channel indicator LEDs
  
• Bright switch
  
• Patented, 3-band active EQ w/ mid shift points
  
• Front effects loop
  
• Post gain control
  
• Resonance and Presence controls