Get the Pro Wireless System You Need from GearNuts.com!

The Shure ULXS14/98H wireless microphone system features the mobility you want and the sound quality you need, whether you're hitting the stage with your instrument onstage or in the field. The ULXS14/98H system includes a excellent, small bodypack transmitter that's light enough for unobtrusive use and dependability, while its cardioid microphone easily clips onto the bell of a horn or wind instrument or onto the rim of a drum and delivers clear, natural sound, while rejecting outside sound sources completely effectively. The ULX receiver offers rock-solid performance and cutting-edge controls for the ULXS14/98H rig.

Shure ULXS14/98H Wireless Microphone System with Clip-on Instrument Microphone - J1 Frequency at a Glance:

• Low-profile, great-sounding lavalier mic
• Small, durable bodypack
  
• Dependable receiver
  

Dependable receiver
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and up to 1,440 selectable frequencies. Ready for immediate installation right out of the box, the ULXS4 features an easy-to-read LCD display that offers up group and channel info. You get a useful Mic/Line switch, XLR and 1/4" outs, and a 5-segment signal strength meter. The ULXS4 features the rock-solid reliability you need for great-sounding sound on any stage, and it's packed into a totally useful half-rack-sized chassis.

Small, durable bodypack
The low-profile, highly durable bodypack ULX1 has all the characteristics to meet the demands of high performance. It's designed for use with headworn, lavalier and instrument microphones, plus guitars and basses. The ULX1 attaches to your belt, waistband, or guitar strap with clip for hands-free mobility.

Excellent clip-on mic
The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

ULXS4 Receiver Features:

• Power On Indicator
  
• "RF" Diversity Signal Indicators
  
• 1/4 antennas
  
• Transmitted (TX) Audio Indicators
  
• Receiving Antenna Indicator
  
• Automatic Frequency Selection
  
• Over 1400 selectable frequencies
  
• Group/Channel Displays
  
• Transmitter Battery Life Indicator
  
• MODE Button for Menu Display
  
• SET Button for Saving Settings
  
• Mic/Line level Switch
  
• XLR and 1/4" outputs with level control
  
• Half-rack design

ULX1 bodypack transmitter Features:

• Three-segment battery fuel gauge
  
• Frequency and power lockout
  
• Flexible 1/4-wave antenna
  
• TA4F mini four-pin input connector
  
• Backlit LCD display shows group and channel setting
  
• Fully fully adjustable audio gain control
  
• In attenuation switch (selects 0dB or -20dB attenuation)
  
• PEAK icon appears when audio input overloads the transmitter
  
• Power on/off switch
  
• 8-hour battery life (9V battery)
  
• 300" (100m) operating range

Shure WB98H/C Instrument Cardioid Condenser Microphone Features:
Type: Condenser (electret bias)
Frequency Response: 20Hz-20kHz
Polar Pattern: Supercardioid
Max SPL: 160 dB
Preamplifier Out Clipping Level: 2.5 kilohm load: + 6 dBV (2.0 V); 1 kilohm load: + 2 dBV (1.26 V)
Dynamic Range: 125 dB (max SPL minus A-weighted noise)
Output Noise: 35dB SPL, A-weighted
Signal-to-Noise Ratio: 59 dB re 94 dB SPL
Output Impedance Rated at 150 ohms (actual); Recommended minimum load impedance: 1 kilohm
Hum Pickup: -7.5 dB equivalent SPL in 1 mOe field (60Hz)
Phantom Power: 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3
Dimensions: Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.); Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)