Clean Power for Your Studio Monitors!
Studio monitors have to give you two things: accuracy and clean volume. If you power your passive monitors with a crappy amp, your mixes will suffer. That's where Samson's Servo 200 comes in. It pumps out two channels of clean 100-watt power, so you'll get the most out of your monitors. You even get relay-controlled circuitry that prevents speaker thump when you power up. This amp is also made to fit into your studio rack. Point blank, it's a no-brainer way to improve your studio monitoring. Plug into a Servo 200 and get better results!
Samson Servo 200 Power Amplifier Features at a Glance:- Rugged servo-controlled 3-space 19" rackmount stereo/mono power amp.
- 100 watts per channel @ 4 ohms (stereo)
- 200 watts into 8 ohms (bridged mono mode)
- 20Hz to 50kHz frequency response for maximum sonic performance
- Electronically balanced ¼" inputs
- ¼" and binding post outputs
- Relay-controlled "power-on" circuitry prevents speaker "thumps"
- Front-panel Clip, Idle, Protection and Power lights
- Unique bipolar output stage for enhanced audio performance
- Independent left/right input level controls with 41 detents for precise level matching
- Twin internal wind tunnels with forced-air cooling via two temperature-sensitive provide quiet performance in critical applications
- All-steel chassis with lightweight anodized aluminum heat sink and matte black finish
| Samson Servo 200 Specs: |
| Number of Channels |
2 |
| Power Class |
TBD |
| Watts/Side @ 8 ohms |
66W |
| Watts/Side @ 4 ohms |
100W |
| Watts/Side @ 2 ohms |
TBD |
| Watts Bridged |
200W @ 8 ohms |
| Cooling System |
Continuously Variable Speed, Fan-forced Air |
| DSP |
No |
| Filters |
No |
| Inputs |
2 x 1/4", 2 x RCA |
| Outputs |
4 x Binding Posts, 2 x 1/4" |
| Rack Spaces |
2U |
| Height |
3.5" |
| Depth |
11.7" |
| Width |
19" |
| Weight |
15 lbs. |
|
Close
