Major SVT Tone!
The SVT-3PRO is a lightweight bass head with many of the same features of the SVT-4PRO. Both models are loaded with three 12AX7 tubes in the preamplifier stage with the SVT-3PRO adding another 12AX7 and a 12AU7 for more drive. The SVT-3PRO's Frequency control lets you select the center frequency for the Midrange control, giving you a choice of five distinct "voices" for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that's not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel" for your show-stopping bass solo.
Ampeg SVT-3PRO Features:- Preamp: Tubes (3 x 12AX7)
- Graphic EQ: Yes, 9-Band
- Preamplifier Out/Power Amp In: Yes
- Mid Tone Control: 5-Position
- Input Pad and Bright Switch
- Weight: 26 Pounds
- Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
- RMS Power Out (8 Ohms): 275-Watts
- Mute Switch and Tuner Out
- In Peak LED
- Ultra Low/High Boosts: Yes
- Effects Loop: Yes
- RMS Power Output (4 Ohms): 450-Watts
- 1/4" and Neutrik Speakon Outputs
- Tone Controls: 3-Band
- Driver Tubes: 1 x 12AX7, 1 x 12AU7
- Tube Drive Control
- Power Amp: Solid-State
| Ampeg SVT-3PRO 450 Watt Bass Head Specs: |
| Type |
Hybrid |
| Number of Channels |
1 |
| Power |
450W |
| Effects |
No Effects |
| Compression |
No Compression |
| EQ |
Bass, 5-position Midrange, Treble, 9-band Graphic |
| Amp Modeling |
No Amp Modeling |
| Number of Models |
0 |
| Number of Tubes |
5 |
| Preamp Tubes |
3 x 12AX7 |
| Power Tubes |
No Power Tubes |
| Inputs |
1 x Instrument, 1 x Power Amp |
| Outputs |
1 x Speakon, 2 x Speaker (1/4"), 1 x XLR, 1 x TRS, 1 x Preamp |
| Footswitch I/O |
Yes |
| Effects Loop |
Yes |
| Height |
3.5" |
| Width |
19" |
| Depth |
15.5" |
| Weight |
26 lbs. |
|
Close
