Serious Sound Reinforcement!

Specifically designed to complement Peavey's full line of Sanctuary mixers and power amps, the SSE 12 is a two-way sound reinforcement enclosure that's designed for permanent installation, individually or in arrays for wide coverage in public address or music jobs. The SSE 12 has a horn design with a wide coverage pattern and incorporates flying points on the top and bottom for the utilization of Peavey VersaMount 70 mounting brackets. The SSE 12 is made of high density 13mm birch plywood and covered with a durable acrylic polyurethane, making the enclosure presentable in any setting. The rig can handle 500 watts program or 1,000 watts peak.

Peavey Sanctuary Series SSE 12 Features at a Glance:

• Full range response from 12-inch woofer and 14XT titanium tweeter
  
• High density birch plywood cabinet with acrylic polyurethane finish
  
• Two-way sound reinforcement enclosure for permanent installations
  
• Incorporates flying points for use with Peavey VersaMount 70 mounting brackets

Two-way sound reinforcement enclosure for permanent installations
The SSE 12 is a two-way rig that's been engineered for pro, permanent sound reinforcement installations where cabinets must be "flown" in order to cover as much area as possible. The SSE 12 is designed for arraying on stage, in churches, auditoriums or theme parks. The horn has a wide coverage pattern and the rig can handle 500 watts of program power or 1,000 watts peak.

Full range response from 12-inch woofer and 14XT titanium tweeter
The Peavey SSE 12's low end is produced using the Peavey Scorpion Pro 1200+ 12-inch woofer with a 2.5-inch (64 mm) voice coil. The highs are generated using the highly renowned Peavey 14XT titanium compression driver. Sound Guard IV tweeter protection network is made in. Response is given as 79Hz to 17kHz.
High density birch plywood cabinet with acrylic polyurethane finish
The Peavey SSE 12 starts with a high density, 13mm birch plywood cabinet that's covered with a durable acrylic polyurethane, making the finished enclosure presentable in any application. The SSE 12 is available in either white or natural.

Incorporates flying points for use with Peavey VersaMount 70 mounting brackets
The SSE 12 is engineered for public address and lots of musical jobs and incorporates flying points on the top and bottom for the utilization of Peavey VersaMount 70 mounting brackets.


Peavey Sanctuary Series SSE 12 Features:

• Two-way sound reinforcement enclosure
  
• Designed for permanent installations
  
• Full-range, wide-band reproduction from 79Hz to 17kHz
  
• Available in white or natural finish
  
• Peavey Scorpion Pro 1200+ 12" woofer with 2.5" (64 mm) voice coil
  
• Peavey 14XT titanium diaphragm compression driver
  
• Sound Guard IV tweeter protection network
  
• Seven "flying points" for suspension and angle adjustment
  
• Wide coverage pattern
  
• Rated at 500 watts program or 1,000 watts peak
  
• Four-pin Neutrik Speakon connections