Your New Go-to Stereo Mic Setup!

This is useful. The DPA SMK4061 Stereo Microphone Kit is a complete stereo-miking system — perfect for getting excellent stereo sound, without the setup fuss. With the DPA SMK4061 Stereo Microphone Kit, you get two of DPA's omnidirectional miniature 4061 microphones plus a bunch of mounting accessories. You'll be ready to meet a bunch of miking situations — with finesse. Included in the kit are accessories for miking everything from pianos to acoustic guitar to strings to drums. Looking for miking flexibility at a incredible value? Go with DPA's SMK4061 Stereo Microphone Kit.

DPA SMK4061 Stereo Microphone Kit at a Glance:

• Complete stereo-miking kit readies you for a range of applications
  
• Includes DPA's Boundary Layer Mount for accurate pickup

Complete stereo-miking kit readies you for a range of applications
The SMK4061 combines two DPA 4061 omnidirectional miniature microphones, Lo-Sens, with a wide range of mounting accessories. The system prepares you for effectively miking everything from acoustic guitar to strings to drums to grand pianos — all at a cost-effective value.

Includes DPA's Boundary Layer Mount for accurate pickup
One sweet accessory included with the DPA SMK4061 is the BLM6000 Boundary Layer Mount. It can be used in conjunction with a 4061 (or any of DPA's miniature mics) to place the microphone on a reflective boundary such as a floor, wall, ceiling, piano lid etc, so you can to capture the ambient sound of the area. The sound captured from this "pressure zone" has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom. Another accessory included in the kit is the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs.

DPA SMK4061 Stereo Microphone Kit "What's In the Box:"

• 2 x 4061 Omnidirectional Microphone, Lo-Sens, Black, 3m cable
  
• 2 x BLM6000-B Boundary Layer Mount, Black
  
• 2 x DAD6001-BC MicroDot to 3-pin XLR (P48) with Belt Clip
  
• 1 x DMM0007 Universal Surface Mount, 5 pcs.
  
• 2x DMM0011-B Magnet Mount, Black
  
• 1 x DUA0560 Windscreen, Black, 5 pcs.
  
• 2 x MHS6001 Microphone Holder for Strings

DPA SMK4061 Stereo Microphone Kit 4061 Microphone Specifications:

• Directional characteristics: Omnidirectional
  
• Principle of operation: Pressure
  
• Cartridge type: Pre-polarized condenser element with vertical diaphragm
  
• Frequency range, +/- 2 dB: 20Hz — 20kHz +/-2dB, Soft boost grid: 3 dB soft boost at 8 — 20 kHz, High boost grid: 10 dB boost at 12 kHz
  
• Sensitivity, nominal, +/- 3dB: 6 mV/Pa; -44.5 dB re. 1 V/Pa
  
• Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 mPa (max. 28 dB(A))
  
• Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
  
• Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
  
• Dynamic range: Typ. 97 dB
  
• Max. SPL, peak before clipping: 144 dB
  
• Output impedance: 30 — 40 Ohm
  
• Cable drive capability: Up to 300 m (984 ft)
  
• Power supply: Min. 5 V — max. 50 V via DPA adapter
  
• Color: Black
  
• Weight: .26 oz including cable and MicroDot connector
  
• Microphone length: 0.5 in
  
• Cable length: 6 ft
  
• Cable: Black

DPA SMK4061 Specs: Microphone Type Condenser Mono/Stereo TBD Polar Pattern Omni Diaphragm Size TBD Frequency Response 20Hz-20kHz, Soft boost grid: 3dB soft boost at 8 - 20 kHz, High boost grid: 10dB boost at 12 kHz Max SPL 144dB SPL Output Impedance 30-40 ohms Signal to Noise Ratio 68dB (A weighted) Self Noise 26dB (A weighted) Color Black Cable Length 9.8 ft. Connector MicroDot (XLR Adapters Included) Weight .02 lb. (7.5g, each) Included Accessories TBD