Affordable Wireless - Without the Worry!

With all the different wireless systems out there, choosing the right gear can be a serious pain. Shure makes it painless, by offering different lineups for different application. If you're on a reasonable budget and are looking for a professional-caliber system that you can run side-by-side with several other wireless systems - say for example, in a church, boardroom, small to mid performance environment, etc - then you're going to want to check out the SLX series. These systems have more range and flexibility than Shure's Performance Gear systems, and less cost and simultaneous channel count than the ULX line.

The Shure SLX4L receiver is built to work with any SLX transmitter operating on the frequency band. What's really cool about the SLX4L is that it's fairly inexpensive, yet powerful and detailed enough that you can run up to 20 systems side by side under good conditions. The SLX4 gets most of its features straight from the ULX series, such as Audio Reference Companding, which gives you way more dynamic range than the average, flat-sounding wireless rig. This cool receiver also gives you a logic circuit and connectors, so you can remotely monitor battery life and use software echo cancellers. The logic functionality makes the SLX4L a perfect companion for Shure's MX690 and MX890 logic-equipped transmitters.

A multi-function LCD display on the SLX4L's front panel shows group, channel, frequency, transmitter battery strength, and locked/unlocked status information. True diversity technology and detachable 1/4-wave antennas allow you to set up your SLX4L receiver to keep dropouts from ever ruining your sound, and simple controls make the system a synch to setup. See, wireless doesn't have to be complicated!

Shure SLX4L Wireless Microphone System Receiver Features at a Glance:

• Automatic Frequency Selection
  
• Automatic Transmitter Setup
  
• 960 Selectable frequencies across 24 MHz bandwidth
  
• Detachable 1/4 wave antennas
  
• Microprocessor-controlled diversity
  
• Logic circuit and connectors (compatible with MX690 and MX890 transmitters)
  
• RF presence LED
  
• 5-segment audio meter
  
• Multi-function, backlit LCD
  
• Low battery indicator
  
• Frequency and power lockout
  
• Rugged metal chassis
  
• Volume control on rear of unit
  
• 1/2 rack design
  
• Furnished rack hardware
  
• Non-slip bumpers for use out of rack
  
• Operates on the G5 Band (494-518MHz)
  
• XLR and 1/4" outputs