Go Long - Really Long!
Have you ever tried a really long cable run between you and your amp? No, we mean really long cable runs? The tone sucks, all but disappearing, right? What if there was a magic box (actually two of 'em!) that allowed you to push crazy distances (like over 300')? Radial has one, and it's called the SGI Studio Guitar Interface. Here's how it works: plug your guitar into the input end of the system. The output is then fed via standard mic cable to the receiver module, with a 1/4" cable feeding your amp. Like everything Radial does, the innards of the SGI Studio Guitar Interface is loaded with top-notch components, meaning you never have to worry about sound quality or durability. Drag control load correction and isolation transformers ensure great sound at long distances, without bothersome hum or buzz. If your studio or stage setup requires long cable runs, the road-ready SGI Studio Guitar Interface gives you solid results!
Radial SGI Studio Guitar Interface System Features at a Glance:- Drive a guitar signal 300 feet without loss
- 100% discreet Class A electronics
- Drag Control pickup load correction
- Transformer isolated to eliminate noise
- Routes using standard balanced XLR cable
- SGI-TX hi-Z input: 1/4" jack (buffered) with Drag control load correction circuit
- SGI-TX output: Balanced XLR-M output
- SGI-RX input: Balanced XLR-F input
- SGI-RX hi-Z output: 1/4" jack
- Transformers: Radial special design 1:1 transformers on TX and RX modules
- Ground lift: LIFT switch on SGI-RX
- Power supply: Included - 15VDC 400ma , center +
- Construction: 14 gauge steel chassis and outer shell, baked enamel finish
- Size (TX and RX): 4.25" d x 2.75" w x 2.38" h
- Weight: TX - 1.1 lb; RX - 1.1 lb
| Radial SGI Studio Guitar Interface Specs: |
| Type |
Active DI/Guitar Interface System |
| Channels |
1 |
| Inputs |
SGI-TX: 1 x Instrument, SGT-RX: 1 x XLR |
| Outputs |
SGI-TX: 1 x XLR, SGT-RX: 1 x Instrument |
| Height |
2" |
| Depth |
5.5" |
| Width |
3.5" |
| Weight |
2 lbs. each |
|
Close
