A Complete PA You Can Take Anywhere!

If you've played your share of smallish clubs or coffee shops, then you're undoubtedly aware of two things, 1) most of these places don't have much of a PA, and 2) the ones that do would typically be better off without them. But lugging around your own full-sized PA to half-sized venues is far from practical. That's what's so cool about the Fishman SA220 Solo Performance System. It's a complete 2-channel PA you can easily take with you. If you're a singer-songwriter, then this is absolutely the system for you. Sure it doesn't look big, in fact, the SA220 Solo Performance System isn't big at all - a mere 35 lbs. that you can easily carry in one hand or roll along in its custom case (included). That doesn't stop it from putting out a lot of sound though.

The way it works is that there are six 4" speakers that form a line array covering a small room easily and evenly. You've got to hear it to believe it. There's no need for a subwoofer or large low-frequency drivers, the SA220 Solo Performance System has plenty of thump as it is. There are two mic/instrument input channels - perfect for a guitar and a microphone - and a stereo line input for pre/post show music or a keyboard. The SA220 Solo Performance System also features a handy feedback fighting circuit, so you don't have to worry about where to position yourself. That means the entire SA220 Solo Performance System can easily act both as the house PA and as a monitor. All you need is your guitar, a mic, and the SA220 Solo Performance System, and you're ready to perform!

Fishman SA220 Solo Performance System Features at a Glance:

• Compact line array
  
• 6 x 4" cone midrange drivers (200W)
  
• 1" neodymium soft dome tweeter (20W) with tweeter level control
  
• High-excursion custom drivers and servo power amp
  
• 2 mic/instrument channels with 3-band EQ, phantom power
  
• Independent reverb level and effect loops on each channel
  
• Per-channel phase and notch filters
  
• Auxiliary stereo input with level control
  
• 4 digital reverb effects with master level
  
• Balanced XLR D.I. outputs for both channels and main mix
  
• Monitor I/O for better onstage ensemble monitoring
  
• Channel mute with remote footswitch input
  
• Tuner output
  
• Stand and padded carry bag with wheels included
  
• 41.5" H x 5.6"W x 6.6" D
  
• 25 lbs. without stand - only 35 lbs. with stand and bag!

Fishman SA220 Solo Performance System Specs: Powered Yes Power Configuration Biamped LF Driver Size 6 x 4" Mid-woofers LF Driver Power Amp 200W HF Driver Size 1" HF Driver Power Amp 20W Frequency Range 80Hz-20kHz Crossover Frequency 4kHz Maximum Peak SPL 114 dB @ 1m Horizontal Coverage Angle 150 degrees Vertical Coverage Angle 60 degrees Enclosure Material Polypropylene Mounting Options Pole (Stand Included) Inputs 2 x XLR (Mic), 2 x 1/4" (Instrument), 2 x 1/4" (Returns), 1 x 1/4" (Aux), 1 x XLR (Monitor) Outputs 2 x 1/4" (Sends), 2 x XLR (DI), 1 x 1/4" (Tuner), 1 x XLR (Monitor), 1 x XLR (Mix DI) Height 41.5" Width 5.6" Depth 6.6" Weight 25 lbs. (35 lbs. w/Stand and Bag)