Stereo Ribbon for Incredible Sound!

The AEA R88 stereo ribbon microphone utilizes the same basic LRG and acoustic structure as the R44CNE, and delivers that "big ribbon" sound for stereo jobs.

AEA's first ribbon microphone, vintage high-output R44, continues gaining converts with its natural sound, articulate midrange and forgiving nature. Both the AEA R88 and R44 use Large Ribbon Geometry (LRG) architecture with a big, .185 by 2.35 inches by 1.8 micron, pure aluminum low-tension ribbon that delivers effortless bass down to 20 Hz. Both these LRG microphones handle high SPL situations well and can handle 168 dB SPL at 1 kHz and above.

AEA, which has been working with high-performance ribbon microphones for over 20 years, also manufacturers accessories for stereo and surround recording. Its custom products include high-end studio booms and stands, Decca trees, stereo mic positioners, MS stereo decoders and solid-state stereo phase monitors.

The AEA R88 is a new mic and a vintage sound. Pure and true, it is remarkably free of distortion. Just as versatile as its renowned father,it flatters voice, strings, brass and drums.

AEA R88 Specs: Microphone Type Ribbon Mono/Stereo Crossed Figure-8 Polar Pattern Figure-8, Blumlein Configuration (90°) Ribbon Type Aluminum, 1.8 microns Thick, 4.7mm x 59.7mm Frequency Response 20Hz-15kHz Max SPL 165dB SPL Output Impedance 270 ohms Signal to Noise Ratio TBD Self Noise TBD Connector 5-Pin XLR Weight 3 lbs. Included Accessories 13.1 ft. XLR Breakout cable, Case