Superb (and Robust) Ribbon Mic Pair!
You're gonna put ribbon mics on THAT? Are you bonkers? Not if you're using Royer's unbelievable R-101 Matched Pair of ribbon mics! This pair's tough enough to handle drums, loud guitar cabs, brass instruments... you get the idea. We're talking a pair of ribbon microphones with 135dB-plus SPL handling. Look around your studio; you can mic a LOT of different stuff - in glorious true stereo - with the R-101 Matched Pair. Each mic has a multiple-layer windscreen that helps keep the ribbon element safe from wind damage and plosives. You know how awesome Royer ribbon mics sound. Here's your chance to get that smooth, inimitable ribbon sound... with no worries!
Royer R-101 Matched Pair Passive Ribbon Microphone Pair Features at a Glance:- High SPL capabilities for electric guitar and percussion
- Multi-layered wind screen provides superior protection to ribbon element
- No internal electronics to overload or produce distortion up to maximum SPL rating
- Extremely low residual noise
- Ribbon element not affected by heat or humidity
- Absence of high-frequency peaks, ringing, and phase shifts
- Equal sensitivity from front or back of element
- Acoustic operating principle: Electrodynamic pressure gradient
- Polar pattern: Figure-8
- Generating element: 2.5-micron aluminum ribbon
- Magnets: Rare Earth Neodymium
- Frequency response: 30 - 15,000 Hz +/- 3dB
- Sensitivity: -48dB (re. 1v/pa)
- Output impedance: 300 ohms at 1kHz (nominal)
- Rated load impedance: 1500 ohms (or greater)
- SPL handling: Greater than 135dB at 30Hz
- Output connector: Male XLR 3-pin (pin 2 hot)
- Finish: Matte black
- Included accessories: Shockmount, carrying case, mic sock
- Optional accessories: Pop screen
- Microphone warranty: Lifetime to original owner (repair or replace at Royer's option)
- Ribbon element warranty: One year
| Royer R-101 Matched Pair Specs: |
| Microphone Type |
Ribbon |
| Mono/Stereo |
TBD |
| Polar Pattern |
Figure-8 |
| Diaphragm Size |
TBD |
| Frequency Response |
30Hz-15kHz |
| Max SPL |
135dB SPL |
| Output Impedance |
300 ohms |
| Signal to Noise Ratio |
TBD |
| Self Noise |
TBD |
| Low Cut Filter |
TBD |
| Pads |
TBD |
| Color |
TBD |
| Connector |
XLR |
| Weight |
1.06 lbs. |
| Included Accessories |
Shock mount, Carry case |
|
Close
