The Indestructible DI Box for Under $100!
When you need a DI, rely on the box the pros turn to the most! The ProDI is the most affordable direct box made by Radial, but it still incorporates the same tough-as-nails construction that makes Radial the first-call DI of engineers the world over. Using 14-gauge steel welded I-beam construction, the ProDI is virtually indestructible. That means you'll get years of trouble-free service - that's a lot of bang for the buck! A 15dB pad reduces hot signals, keeping your input free of clipping. Don't cut corners on a critical link in the chain - put Radial's ProDI to work for you!
Radial ProDI Passive Mono Direct Box Features at a Glance:- Full range passive direct box
- Isolation transformer eliminates noise
- Very low harmonic and phase distortion
- Compact and rugged design
- Ideal for live sound and studio.
- Isolated XLR connector eliminates chassis ground potential
- Custom audio transformer on input provides 100% isolation to eliminate hum- and noise-causing ground loops, while maintaining signal integrity.
- Military-spec PC board, with full surface ground plane to reduce susceptibility to RF noise
- High grade switches — long life, high cycle for reliable performance
- 14-gauge steel welded I-beam construction makes it virtually impossible to torque the PC board
- -15dB pad reduces the level going in from loud sources that could overload the circuit and cause distortion
- Book-end design creates a protective zone around the switches & connectors, indestructible 14-gauge steel construction
- Full no-slip rubber bottom pad provides mechanical isolation, electrical insulation and prevents unit from sliding around
- Balanced male XLR output connector, AES standard with pin-1 ground and pin-2 hot
- Lift switch lifts the ground to pin-1 on both channels.
- Heavy-duty baked enamel finish for excellent durability
| Radial ProDI Specs: |
| Type |
Passive DI |
| Channels |
1 |
| Inputs |
1 x 1/4" |
| Outputs |
1 x XLR, 1 x 1/4" thru |
| Height |
1.75" |
| Depth |
4.25" |
| Width |
2.75" |
| Weight |
1.2 lbs. |
|