Plug in and Let it Rip!
The Bogner Panama tube amp head packs a huge punch in a low-wattage design, pumping out just four watts to give you outrageously overdriven tones at a reasonable volume. It's great for recording, especially in smaller project and home studios. It'll get loud if you want it to, but the point was to give you access to the incredibly rich and varied sound of a high-gain Bogner amp that won't blow your roof off. It doesn't do clean tones, but it will give you everything from mellow crunch to face-melting mayhem. The four-position Schizo switch changes the tone and gain settings, and actually give you four different amp voicings to play with. Factor in two switchable gain stages, a low-power mode, and Bogner's incredible craftsmanship and attention to detail, and you'll see that the Bogner Panama tube amp head is ready to rock - hard!
Bogner Panama Tube Amplifier Head Features:- Low-watt, high-gain amp gives you a ton of different overdriven and distorted tones
- You can get the sound of a cranked tube amp at low volumes, but it can get loud too
- Re-structure the tone and gain stages with the four-position Schizo switch
- Toggle between one or two gain stages with the Mode switch
- Three-position StandBy switch gives you more harmonics with a "softer feel" when set to the Low position, described as a "variac brown sound" by Bogner
- Connect an 8 Ohm extension speaker cabinet
- Incredible durability from the aluminum chassis and tolex covering
| Bogner Panama Head Specs: |
| Type |
Tube |
| Number of Channels |
1 |
| Power |
4W |
| Effects |
No Effects |
| Reverb |
No Reverb |
| EQ |
No EQ |
| Amp Modeling |
No Amp Modeling |
| Number of Models |
No Amp Modeling |
| Number of Tubes |
4 |
| Preamp Tubes |
2 x ECC83 |
| Power Tubes |
2 x 6V6 |
| Inputs |
1 x Instrument |
| Outputs |
1 x TS Speaker Output, 8 Ohms |
| Footswitch I/O |
No Footswitch I/O |
| Effects Loop |
No Effects Loop |
| Height |
7.5" |
| Width |
18.375" |
| Depth |
7" |
| Weight |
16 lbs. |
|
Close
