Lay Down Some Patch!
Isn't it weird how some things that really shouldn't be difficult always tend to be? Take patch bays for example. You'd think you'd just be able to plug your gear in one side and patch cables in the other and everything would simply work... and you'd be right! That's the wonderful thing about the dbx PB-48 - its completely straight forward. No DB25 breakout cables to mess with, no soldering, no itsy-bitsy jumpers to pull out with tweezers and lose in the carpet, just straight-forward plug it in and it works. Want to switch a pair from normalled to de-normalled? Easy! You just pop out the section and flip it over. Plus, each contact in the PB-48 is made of nickelsilver alloy, so you don't have to worry about oxidization or terminals going bad. And the whole dbx PB-48 uses 1/4" TRS jacks, so there are no pricy TT cables to buy.
dbx PB-48 Patchbay Features at a Glance:- 48 patch points
- 24 pairs on 24 cards
- Each pair/card can be set to any normalled configuration or entirely de-normalled
- All connections are 1/4" TRS
- Contacts made of pure nickelsilver
| dbx PB-48 Specs: |
| Analog or Digital |
Analog |
| Number of Points |
48 |
| Format |
Rack |
| Connector Types - Front |
1/4" TRS |
| Connector Types - Back |
1/4" TRS |
| Function Mode |
Normal, Half Normal, De-Normalled (Thru) |
| Height |
1.74" |
| Depth |
2.6" |
| Width |
19" |
| Weight |
2.3 lbs. |
|
Close
