CloseBig Sound, Tiny Footprint!
Sometimes you need a microphone that's discreet, right? But, you don't want its unobtrusive personality to give you equally thin & skinny sounds. That's why you trust the pros over at Audix and their amazing MicroBoom MB5050! The entire MicroBoom series is all about giving you huge-sounding performance, in a super-slim form factor. This particular MicroBoom features a 50" carbon fiber boom arm that'll attach to any microphone stand. At one end, there's a mini cardioid condenser microphone to pick up an orchestra, choir, drum kit, room... whatever you want to capture. Internally, there's a high-quality Mogami cable that terminates to a mini-XLR connector. No messy cable tangles! In fact, there's even a built-in preamp, so you won't have to mess with one.When you want an ultra-clean, pro-level appearance onstage or in the studio, you've got to go with the MicroBoom MB5050. The truth? It sounds just as ultra-clean and professional as it looks.
Audix MicroBoom MB5050 Features at a Glance:
MicroBoom Stand
- Less than .3 inches diameter
- 2.5 ounces
- 50" length
- Made of Carbon Fiber
M1250 Condenser Microphone:
- Transducer Type: Condenser
- Frequency Response: 80Hz - 20kHz
- Polar Pattern: Cardioid
- Output Impedance: 150 ohms
- Sensitivity at 1k: 7.8 mV/ Pa (-42 dbV +/-1.5dB)
- Recommended Load Impedance: > 1000 ohms
- Signal/Noise Ratio (A-weighted): 73dB
- Equivalent Noise Level (A-weighted): 21dB
- Maximum SPL @ .5% THD: 150dB
- Dynamic Range: 129dB
- Power Requirements: 48 - 52 V
- Connector: 3 pin mini-XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing / Finish: Brass / paint
- Weight: .6 oz / 17 grams
- Length: 1.97 inches / 50 mm
|
||||||||||||||||||||||||||||||||
