JBL Quality in 5.1 Surround!

The JBL LSR6325P/5.1 Surround Monitor Rig combines the newest small monitors in the LSR Series with JBL's proven LSR6312SP subwoofer to provide full-range 5.1 surround sound for environments that don't need or can't handle gigantic loudspeakers. All of JBL's newest technology - Linear Spatial Reference, RMC Room Mode Correction and other developments - make the LSR6325P/5.1 Surround Monitor rig a leading-edge addition to surround mixing suites and home theaters alike!

JBL LSR6325P/5.1 Surround Monitor rig at a Glance:

• Linear Spatial Reference technology assures accurate mids and highs
  
• Room Mode Correction eliminates problems in bass response
• LSR6312SP powered subwoofer with integrated RMC Room Mode Correction system
  
• Five LSR6325P bi-amplified monitors with cast aluminum enclosures
  
• Full-range 5.1 rig with plenty of power, wide frequency range and smooth, even response
  

Full-range 5.1 rig with plenty of power, wide frequency range and smooth, even response
JBL's LSR6325P/5.1 Surround Monitor Rig offers an outstanding combination of nearfield monitors and a specially calibrated subwoofer that deliver a total of 1000 watts of power to the transducers. From the sparkling highs of the LSR6325P monitors to the clear, controlled lows of the LSR6312 sub, the rig offers frequency response from below 30Hz to 20kHz. And thanks to JBL's proprietary technologies that perfect mid and treble response and control room modes for accurate bass, the LSR6325P/5.1 System offers a balanced, sonically accurate surround signal.

Five LSR6325P bi-amplified monitors with cast aluminum enclosures
The LSR6325P/5.1 surround system starts with five JBL LSR6325P monitors. These small models boast exceptional performance and incorporate features to minimize the detrimental effect on response caused by the acoustic properties of the room. With 5.25" high-excursion low frequency transducers powered by 100 watts RMS and 1" damped titanium-composite high frequency transducers powered by 50 watts, the LSR6325P loudspeakers deliver plenty of power and smooth, balanced frequency response. They're also THX pm3-approved for pro mixing use.

LSR6312SP powered subwoofer with integrated RMC Room Mode Correction system
The LSR6325P/5.1 surround system also includes a LSR6312SP powered subwoofer based on a 12" woofer with JBL's patented Neodymium Differential Drive speaker and 250 watts of power. An built-in bass management system rocks all the features you need for multi-format surround production including LCR and Direct LFE inputs, summed output for chaining multiple subwoofers, -4dB alignment setting, and JBL's new RMC Room Mode Correction system with an included RMC Calibration Kit.

Linear Spatial Reference technology assures accurate mids and highs
The new LSR6325P includes innovative technologies to overcome problems in the room and perfect response at the mix position. Due to irregular off-axis response, a speaker which measures "flat" on-axis in an anechoic chamber, may not produce flat response at the mix position. JBL's Linear Spatial Reference technology ensures that the mid and treble content that reaches the mix position is also smooth and accurate. This is accomplished by engineering into the system a +/- 30 degrees horizontal, and +/- 15 degrees vertical, radiated response. Using LSR technology, the mid and treble response of the LSR6325P is flatter at the mix position, regardless of working distance.

Room Mode Correction eliminates problems in bass response
The LSR3612SP subwoofer is equipped with RMC - JBL's ingenious method of zeroing out bass problems at the mix position caused by room modes. A built-in 1/10th octave parametric EQ lets you correct problems below 100Hz. The RMC Calibration Kit features everything you need to identify problematic room modes and tune your rig. Room Mode Correction ensures the LSR6312SP subwoofer's response is flat and even throughout the listening zone.

JBL LSR6325P/5.1 Surround Monitor System Features:

• Five LSR6325P monitors with 5.25" woofers and 1" titanium composite treble transducers
  
• LSR6312SP subwoofer with 250 watts driving a 12" Neodymium Differential Drive bass speaker
  
• Room Mode Correction system with included RMC Calibration Kit for subwoofer
  
• Linear Spatial Reference technology ensures even mid and treble dispersion and response

JBL LSR6325P/5.1 Specs: Powered Yes Power Configuration Bi-amped LF Driver Size 5.25" (Satellite), 12" (Sub) LF Driver Type Cone (Satellite) LF Driver Material Tempered Paper with Butyl Rubber Compliance (Satellite), Carbon Fiber Composite (Sub) HF Driver Size 1" HF Driver Type TBD HF Driver Material Titanium Composite LF Driver Power Amp 100W (Satellite), 260W (Sub) HF Driver Power Amp 50W Frequency Range 70Hz-20kHz (+1, -2 dB) (Satellite), 28Hz-60hz (-6 dB) Crossover Frequency 2.3kHz (Satellite), 80Hz (Sub) Maximum Peak SPL >109 dB SPL @ 1m (Satellite), >115 dB @ 1m (Sub) Enclosure Type Ported Input Types Satellite: 1 x XLR, 1 x RCA, Sub: 4 x XLR Output Types Sub: 4 x XLR Height 10.6" (Satellite), 15.5" (Sub) Width 6.8" (Satellite), 25" (Sub) Depth 9.5" (Satellite), 11.5" (Sub) Weight 17 lbs. (Satellite), 50 lbs. (Sub)