What a Value!

With the cost conscious user in mind, JBL delivers the JRX100 series!

JBL Quality Design
A sophisticated, cutting-edge network topology design is utilized in JRX100 models to ensure quality performance. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard treble driver protection guards against damage caused by inadvertent overpowering of the system. All full-range models feature Neutrik® Speakon and 1/4" in connectors.

Made To Take A Beating
All JRX100 series models are made of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To ensure durability, JBL constructs these enclosures with cutting-edge adhesives and closely mechanically spaced fasteners, while competitive systems typically rely on glue. Non-resonant, all metal handles are used and an 18 gauge, full metal grille protects the drivers. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.

Dual-Angle Pole Socket
A new feature of the JRX100 line is the dual-angle pole socket. This feature allows the speaker to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, it is possible to achieve more even audience coverage and reduce the destructive acoustic reflections from walls.

JRX115
The dual-angle pole socket is featured on two JRX100 models - the JRX115 and the JRX112M. The JRX115 is a 15" two-way front-of-house speaker with 1000 watts peak power capacity and 250 watts continuous.


JBL JRX115 Features:

• 15" woofer
  
• 3/4" MDF construction
  
• 35 mm dualangle pole mount socket
  
• 1" titanium diaphragm, fluid-cooled compression driver mounted on a Progressive Transition waveguide
  
• 15" two-way portable speaker system
  
• 18-gauge steel grill
  
• Carpet-covered, trapezoidal enclosure
  
• Steel handles
  
• Neutrik Speakon and 1/4" input
• SonicGuard treble protection
  

JBL JRX115 Specs: Powered No Power Configuration Full Range LF Driver Size 15" HF Driver Size 1" Power Rating (Program) 250W Peak Power Capacity 1,000W Impedance 8 Ohm Frequency Range 38Hz-16kHz Crossover Frequency 1.6kHz Maximum Peak SPL 128dB Horizontal Coverage Angle 90 Degrees Vertical Coverage Angle 50 Degrees Enclosure Material MDF Mounting Options Pole, Wedge Inputs 1 x Speakon, 1 x TS Outputs No Outputs Height 27.5" Width 18.1" Depth 17" Weight 60.5 lbs.