Zap the Buzz While Keeping Your Gear Safe!
You've checked the cables and the power conditioner, killed the fluorescents, turned off the HVAC, even cheated the grounds like an idiot and still, no matter what you do, there's that persistent buzz from somewhere in the system. That's it! It's time to break out the big guns. An Ebtech HE-2 XLR will totally destroy AC hum and interference nose riding on the system. Just run your balanced XLR or TRS cables in and out of the HE-2 XLR, and listen as your noise floor drops away. What's even cooler is that the Ebtech HE-2 XLR takes care of your noise without altering your sound
or lifting the ground altogether, so you can get rid of those dangerous cheater plugs once and for all.
Ebtech HE-2 XLR Hum Eliminator Features at a Glance:- Eliminates 50/60Hz ground loop hum, buzz and noise
- Breaks ground loops safely while leaving all signal grounds intact
- Completely passive design (requires no power)
- Converts automatically between balanced and unbalanced lines
- 1/4" TRS and XLR "smart" jacks inputs and output
- Automatically translates signal voltages to match difference in ground potential
- Frequency response 20Hz-70kHz +/-0.5dB
- Distortion less than 0.005% THD @ 1kHz
- Crosstalk better than -97dB
- Maximum source impedance 1kOhm. Minimum load impedance 10kOhm
- Dimensions 3-1/2" x 4-3/4" x 1-1/2"
| Ebtech HE-2 XLR Specs: |
| Type |
Hum Eliminator |
| Channels |
2 |
| Inputs |
2 x XLR, 2 x TRS |
| Outputs |
2 x XLR, 2 x TRS |
| Height |
1.5" |
| Depth |
3.5" |
| Width |
4.75" |
| Weight |
1.3 lbs. |
|
Close
