Zap the Buzz While Keeping Your Gear Safe!
You've checked the cables and the power conditioner, killed the fluorescents, turned off the HVAC, even cheated the grounds like an idiot and still, no matter what you do, there's that persistent buzz from somewhere in the system. That's it! It's time to break out the big guns. An Ebtech HE-2 will totally destroy AC hum and interference nose riding on the system. Just run your balanced TRS cables in and out of the HE-2, and listen as your noise floor drops away. What's even cooler is that the Ebtech HE-2 takes care of your noise without altering your sound
or lifting the ground altogether, so you can get rid of those dangerous cheater plugs once and for all.
Ebtech HE-2 Hum Eliminator Features at a Glance:- Eliminates AC hum and noise quickly and easily
- Automatically converts back and forth between balanced and unbalanced lines
- Allows using professional equipment for long signal runs free of hum
- ¼" TRS "smart jacks" inputs and outputs
- Safely breaks ground loops while leaving all signal grounds in tact
- No dangerous ground lifting
- Automatically translates signal voltages to match differences in ground potentials, avoiding clipping
- Less than .005% THD @1kHz
- Crosstalk better than -97dB
| Ebtech HE-2 Hum Eliminator Specs: |
| Type |
Hum Eliminator |
| Channels |
2 |
| Inputs |
2 x TRS |
| Outputs |
2 x TRS |
| Height |
2.63" |
| Depth |
3.5" |
| Width |
4.75" |
| Weight |
1.2 lbs. |
|
Close
