The "More Me" Solution for Monitoring!

If you've played live, you know how hard it can be to hear yourself. The Hear Technologies Hear Back Four Pack solves this problem, giving you hands-on control over your own monitor volume and mix. A built-in DSP limiter brick walls everything, which keeps your hearing protected along with keeping any wedges from overloading. Perfect for onstage or in the studio, the Hear Back Mixer gives you "more me" in an easy-to-use system, all linked with Cat 5e cable. This is a 4-pack of the Hear Back Mixer with the Hear Back Hub.

Hear Back Hub Features:

• Three switch selectable 8-channel input sources:
  - ADAT Optical
  - Analog
  - HearBus
  
• 24-bit A/D converters
  
• Digital inputs: 44.1KHz and 48kHz sample rates
  
• Less than 1.5 milliseconds system delay
  
• 3-LED four-level metering
  
• Standard Cat 5eE - delivers power and signals to mixers
  
• Daisy-chain for very large systems
  
• Internal universal input power supply
  
• 1 RU chassis

Hear Back Mixer
The Hear Back Mixer is your personal control surface that allows you to create YOUR OWN monitor mix - live! The Mixer features 10-channel control, 8 incoming signals and your own monitor volume. You also have control over the built-in DSP Limiter (designed as a "brick wall" limiter for hearing protection and to protect monitor wedges from overload). Also, for convenient on-stage or in the studio use, the Mixer offers a built-in standard threaded mic stand mount! Each Mixer is connected to the Hub via affordable and easily available Cat 5e cables. Total control of your own mix - that's the Hear Back system.

Hear Back Mixer Features:

• Local control up to ten channels of audio
  
• Master volume
  
• Built-in DSP limiter
  
• 24-bit D/A converters
  
• Less than 1.5 millisecond
  
• total system delay
  
• Bus status indicator
  
• Headphone amplifier fault indicator
  
• Link indicators
  
• Standard Cat 5E power and
  
• signal connection
  
• Balanced line outs, mono/stereo
  
• Stereo AUX in: Expand numbers of mixers or drum module/metronome input
  
• Built-in standard threaded mic stand mount

Hear Back Four Pack Features at a Glance:

• Virtually unlimited system size
  
• Excellent audio fidelity
  
• Built-in DSP Limiter
  
• Very long digital lines possible without loss of audio quality
  
• Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel.
  
• Local control of up to ten channels of audio (8 inputs plus a stereo Aux input) Master Volume (controls the level to the headphones, line outs and the Aux input to the line outputs)
  
• Built-in DSP Limiter (designed as a "brick wall" limiter for hearing protection and to protect monitor wedges from overload)
  
• Headphone amplifier fault indicator in case of over temperature, or a short, the red LED comes on to alert the user something is a problem.
  
• A second visual trouble shooting aid for the user is the Bus status indicator
  
• Link Indicators - Whenever two pairs of mono inputs are linked for stereo operation the link LED is illuminated
  
• Standard Cat 5eE power and signal Connection, cost effective, simple, non-obtrusive way to connect eight channels of audio. The Cable is held in place with a "built-in cable strain relief"
  
• Balanced Line-Outs, Mono/Stereo
  
• Stereo AUX In
  
• Built-in Mic Stand Mount may be mounted to a standard mic stand or clipped onto a stand extension bar or clip
  
• High Power - Low Distortion Headphone Amplifiers