Premium Audio, Plenty of I/O, Pro Results!
MOTU's HD192 Core sets new standards for features and value as a two rack-space 12-channel high definition audio interface for Mac and Windows. The HD192 has excellent audio recording and playback on 12 balanced XLR analog ins and outs at any standard sample rate up to 192 kHz, with expansion up to 48 channels of 192 kHz! And the HD192 is full of cutting-edge features, like AES/EBU I/O with sample rate conversion both in and out. Ideal for surround jobs, the HD192 can support two simultaneous 5.1 mixes.MOTU HD192 Core at a Glance:
- Front panel metering and power switch.
- High-definition converters.
- PCI-424 card.
- Twelve channels of balanced, 24-bit/192kHz analog I/O on XLR
Inputs and Outputs
All 12 XLR inputs and outs on the HD192 rear panel support operation at 44.1, 48, 88.2, 96, 176.4 and 192kHz. Latest-generation converters and state-of-the art design provide exceptional audio quality. The measured dynamic range for the 12 analog inputs is just over 120 dB. AES/EBU digital I/O is also provided at samples rates up to 96kHz with independent real-time sample rate conversion on the digital in and out. A separate "AES word in" BNC connector allows users to clock the AES/EBU section independently from the rest of the rig. Rig word clock input/output is also provided on BNC connectors.
PCI-424 Card
The HD192 core rig includes the PCI-424, the same enhanced PCI card used by MOTU's 2408mk3 and 24I/O. The PCI-424 card adds a fourth Audio Wire port that allows users to connect up to four MOTU audio interfaces to the computer. At 12 channels each, a fully expanded HD192 rig offers 48 at once active in and out connections at sample rates up to 192 kHz (or as many channels as the host computer supports at the 4x sample rates). HD192 users can connect any MOTU PCI audio interface to their PCI-424 card, including the new 2408mk3 and 24I/O interfaces, plus all legacy PCI-324 interfaces (the original 2408, 2408mkII, 1296, 1224, 24i and 308). Legacy interfaces can take full advantage of the PCI-424's new CueMix DSP near-zero latency monitoring.
MOTU HD192 Converters
The most important link in the digital recording chain is the A/D converter. It is the critical component that converts your analog input signal into digital details. The higher the quality of the A/D converter, the better your recordings will sound.
The 192-kHz converters in the HD192 are the totally same used in more expensive HD systems. With 120dB A-weighted dynamic range and a THD+N of 0.0005%, the HD192 is simply the best sounding front end you can buy for your digital audio workstation.
Front Panel Metering
The HD192's front panel has dedicated 19-segment level meters for all 12 inputs and outputs. Two over meters are included, a temporary over meter and an over/hold meter that is resettable via software. Comprehensive clock status LEDs are also included so you can see at a glance the current sampling rate and clock source.
Useful in the unlikely event you wish to turn off your HD192, a front panel power switch is provided. An interesting fact about MOTU Audio interfaces is that they are hot swappable. This means you can power off, plug-in, add and remove interfaces without turning your computer off or restarting.
MOTU HD192 Features:
- Twelve channels of +4, balanced, 192-kHz 24-bit analog inputs and outs using XLR jacks.
- AES/EBU digital I/O
- 19-segment LED meters on every input and output
- 16, 20, and 24-bit recording at 44.1, 48, 88.2, 96, 176.4 or 192kHz
- Word clock in and out
- Dedicated word clock input for AES/EBU I/O
- AudioWire connector for PCIe-424 audio card
- A-weighted dynamic range 120dB
- THD+N of 0.00056% (-106dB)
- R/CORE transformers for efficient, low-heat operation with virtually no magnetic interference or acoustic hum
|
||||||||||||||||||||||||||||||||||||||||||







