There's a New Digital Snake in Town
If you spend enough time on the road, you know that live audio can be messy. The bigger the show - the bigger the mess. A digital snake can help. Why digital? Well, freedom, for one thing. Freedom from the noise, complexity, and bulk of analog snakes. Got big shows? This snake can handle 'em.The Aviom DS48 Digital Snake gives you hassle-free digital connectivity between stage and front of house for up to 48 mic/line inputs and 16 line-level returns. The included pair of AN-16SBR System Bridges simplify your setup, and all audio data travels over a single Cat-5e cable (up to 500') between stage and FOH. Now that's gotta simplify your life.
Each input channel on the three included AN-16/i-M Mic Input Modules contains a three-segment level meter, a continuously variable gain control, phase reverse, 48-volt phantom power, and an 85Hz rumble filter. The 16 balanced outputs on the four included AN-16/o v.4 Output Modules are supplied via DB-25 multipin connectors. Analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.
The DS48 may be used with nearly any mixer, and all signals in the system may be split as needed, simply by connecting additional output modules in the split location. So, if you've got big, messy audio, call in the big digital snake to restore law and order.
Aviom DS48 48x16 Digital Snake System Features at a Glance:
- 48 mic/line inputs and 16 line-level returns
- The DS48 48x16 Digital Snake System consists of:
- 3 AN-16/i-M Mic Input Modules, each with:
- Sixteen high-quality mic preamplifiers, with 24-bit A-to-D converters
- 48-volt phantom power on each channel
- XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
- Continuously variable gain, phase reverse, and 85Hz rolloff per channel
- Stereo Link switch per pair of channels
- Built-in passive mic splitter
- Balanced insert send and return jacks (1/4-inch TRS)
- Dual A-Net outputs
- Sixteen high-quality mic preamplifiers, with 24-bit A-to-D converters
- 1 AN-16/i Input Module:
- Sixteen balanced audio inputs (1/4-in TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net Out and A-Net Expansion network connections (RJ45)
- Stereo Link switches for each channel pair
- Four-position gain switches (+22, +4, 0, -10dB)
- Signal present and clip LEDs per channel
- Sixteen balanced audio inputs (1/4-in TRS connectors)
- 4 AN-16/o v.4 Output Modules, each with:
- 16 balanced mic- or line-level outputs
- Four-position output level switch per channel pair
- +24, +18, and +4dBu line-level, or mic-level outputs
- 48kHz, 24-bit D/A converters
- Unlimited splits and digital copies
- 16 balanced mic- or line-level outputs
- 1pr AN-16SBR System Bridges, each featuring:
- Four Neutrik EtherCon connectors, labeled A, B, C, and D (16 channels each)
- One Neutrik EtherCon connector for Bridge output (up to 64 channels)
- Requires no power supply
- Multiple AN-16SBR units can be used to create complex systems
- Four Neutrik EtherCon connectors, labeled A, B, C, and D (16 channels each)
- Cat-5e cable Not Included








