CloseGet More From Your Wireless System!
The Audio-Technica ATW-49SP Active Antenna Splitter Kit includes two Active Antenna Splitters designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas. Each Active Antenna Splitter is a broadband device (frequency range from 440 to 900 MHz) that splits an incoming RF signal into two identical outgoing RF signals. One set of Active Antenna Splitters enables one set of antennas to feed wireless receivers of different frequency bands.NOTE: The ATW-49SP Antenna Splitter requires +12VDC power from any Audio-Technica 4000 or 5000 series receiver or +5 to +14VDC from any wireless receiver or antenna distribution system that offers antenna power. At least one of the receiver's or distribution amplifier's antenna terminals must provide this voltage source. A light on each Active Antenna Splitter indicates that power has been correctly applied.
- Designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas
- Two One-input, Two-output Active Antenna Splitters
- One set of Active Antenna Splitters enables one set of antennas to feed wireless receivers of different frequency bands
- Four 18" BNC-to-BNC RG 58 Coaxial Antenna Cables
- The Active Antenna Splitter rocks unity gain: there is no RF signal loss from the original antenna signal
- Also perfect for use with a bunch of other receivers and antennas
- Two BNC-to-BNC Barrel Adapters
- Each Audio-Technica ATW-49SP kit includes:
- Each Active Antenna Splitter is a broadband device (440 to 900 MHz) that splits an incoming RF signal into two identical outgoing RF signals
