Super-discreet Mic!

The Audio-Technica ATM350 is perfect for a number of miking applications where space is tight, or low visibility is desired. Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an built-in 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Audio-Technica ATM350 Cardioid Condenser Clip-on Microphone Features:

• Switch: Flat, roll-off
  
• Open circuit sensitivity: -49 db (3.5 Mv) re 1v at 1 pa
  
• Rugged, all-metal design and construction for years of trouble-free use
  
• Frequency response: 40-20,000 hz
  
• Soft protective pouch
• Cable: 13.1' long (permanently attached to microphone), 0.13" diameter, 2-conductor shielded cable
  
• Signal-to-noise ratio: 67 db, 1 khz at 1 pa
  
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  
• Element: fixed-charge back plate permanently polarized condenser
  
• Accessories furnished: AT8542 power module; AT8418 Unimount microphone instrument mount; AT8468 violin mount;
  
• Polar pattern: cardioid
  
• Weight (microphone): 0.5 oz
  
• Crisp, clear, well-balanced response, even at high SPLs
  
• Phantom power requirements: 11-52v dc, 3.5 Ma typical
  
• Impedance: 50 ohms
  
• Out connector (power module): Built-in 3-pin XLRM-type
  
• UniMount clip permits accurate positioning, rocks shock resistance and protects element
  
• Dynamic range (typical): 122 db, 1 khz at max spl
  
• Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  
• Weight (power module): 2.9 oz
  
• Dimensions (microphone): 1.49" long, 0.48" diameter
  
• Max input sound level: 149 db spl, 1 khz at 1% t.H.D.
  
• Dimensions (power module): 3.66" long, 0.74" diameter
  
• One-of-a-kind violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
  
• Corrosion-resistant contacts from gold-plated XLRM-type connector
  
• Low-profile design for minimum visibility
  
• Low frequency roll-off: 80 hz, 12 db/octave
  

Audio-Technica Artist Series ATM350 Specs: Microphone Type Condenser Mono/Stereo TBD Polar Pattern Cardioid Diaphragm Size TBD Frequency Response 40Hz-20kHz Max SPL 149dB SPL (1kHz at 1% THD) Output Impedance 50 ohms Signal to Noise Ratio 67dB, 1kHz at 1 Pa Self Noise TBD Color Black Cable Length 13.1 ft. Connector XLR Weight .03 lb. (Mic), .18 lb. (Power Module) Included Accessories AT8542 power module, AT8418 instrument mount, AT8468 violin mount, pouch