A Diamond in the Rough with a Super-smooth Sound!
The Audio-Technica AT2035 is one of those rare gems you just don't see that often. It's a truly excellent, side-address, large-diaphragm cardioid condenser mic that's such a good deal, lots of people pass over it because they assume it can't be any good. Lucky for you that you're not one of
those people. You know that the AT2035's 80Hz highpass filter and 10dB pad give it an added layer of versatility, making it great for everything from vocals to guitar amps and kick drums. It would be impossible to ignore its smooth, natural sound quality, or the AT2035's fantastic high SPL handling. And when you stop to consider that the AT2035 comes complete with a custom shockmount and storage pouch, you can't help but recognize a good deal like this.
Audio-Technica AT2035 Large-diaphragm Condenser Microphone Features at a Glance:Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range
Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Cardioid
Frequency response: 20Hz-20kHz
Low-frequency roll-off: 80Hz, 12 dB/octave
Impedance:120 ohms
Maximum input sound level: 148dB SPL, 1kHz at 1% T.H.D.; 158dB SPL, with 10dB pad (nominal)
Switches: Flat, roll-off; 10dB pad
Weight: 14.2 oz
Output connector: Integral 3-pin XLRM-type
Accessories: Shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
| Audio-Technica AT2035 Specs: |
| Microphone Type |
Condenser |
| Polar Pattern(s) |
Cardioid |
| Frequency Response |
20Hz-20kHz |
| Max SPL |
148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) |
| Output Impedance |
120 ohms |
| Signal to Noise Ratio |
82 dB, 1 kHz at 1 Pa |
| Self Noise |
12 dB SPL |
| Diaphragm Size |
TBD |
| Low Cut Filter |
80 Hz |
| Pads |
10 dB |
| Length |
6.69" |
| Width |
2.05" |
| Depth |
2.05" |
| Weight |
.89 lbs. |
|
Close
